E-MU Xboard 49 Update Package ajuri lataa ilmaiseksi (ver. 1.­02)

This Update Package is now a Full Installer (application,­ driver and firmware).­ It does not require that you had previously installed software from an original Xboard Installer CD,­ only that your system meets the minimum hardware requirements.­ Requirements: Mac OSX 10.­4 or greater E-MU Xboard 25,­ Xboard 49,­ or Xboard 61 Before you install: If you have experienced a fault in any audio application,­ you should reboot Windows before applying this update.­ Exit all applications before installing these updates.­ This installer will automatically uninstall any older versions of software before installing the new version.­ E-MU Xboard Update V1.­02 contains the following fixes: Firmware Fixes: Issues with the UART calibration on power-up have been fixed Installation Instructions: To Install: Connect your Xboard and turn it on.­ Open the .­dmg file.­ Double-click on the installer icon to begin the installation.­ When the Firmware Updater dialog box appears,­ select the device you want to update,­ and click Update.­ Note: DO NOT unplug the Xboard during the firmware update.­ Once calibration finishes,­ click Exit.­ Note: A small number of Xboard 25/­49 may encounter difficulties such as blank screen or incorrect knob response after installing the firmware.­ If you encounter this problem,­ you should re-initialize the Xboard's UART calibration.­